The ShureShot Shot Timer features 3 fully programmable output relays that can be configured at every one of 6 points along the shot's timeline. They can also be individually configured for the cleaning cycles and post / pre flush cycles.

Please let us know if you notice any errors in this information and we'll have it updated promptly.

  • La Marzocco
  • Synesso (v1)
  • Slayer v3
  • Slayer 1Group
La Marzocco

Recommended settings for your La Marzocco

Your content goes here...

 

Menu 1 (Barista Menu)

DisplayDescriptionDefault

Slow Flashing

Fast Flashing


"Short Shot"

 "Long Shot"

Delay 1

Delay 2

 Delay 3

 Delay 4

 Delay 5

Group Handle Delay 

Group Flush Period
 

Menu 2 (Service Menu)

Setting  Description

This setting is the "Timer Address" - when used on a Gen2 Synesso on a 'Daisy Chain' cable

 Switch Function - should be A1 for Lever switches - such as a Slayer, Synesso Cyncra

Switch input logic - used in A1 mode only . Set to n0 for a Commercial Slayer v3

-  Choose F0 for no flashing or F1 for Flashing
Standby Output Settings
 This sets the output states for Standby

"Begin" Output Settings
 This sets the output states when a shot first commences


 This sets the output states after Delay 1

 This sets the output states after Delay 2

This sets the output states after Delay 3

"Complete" Output Settings
 This sets the output states when the shot is complete (after d4 or d5)

 "Cleaning" Output Settings
 This sets the output states when the cleaning cycle is activated

- Choose 0 for no auto flush, 1 for pre-flush, 2 for post-flush, 3 for both 

 - skip this, as it resets to factory defaults
Synesso (v1)
Slayer v3
Slayer 1Group